免費發布行業信息
企業電子商務平臺
企業電子商務平臺
 |
|---|
|
公司基本資料信息
|
|||||||||||||||||||||||||||||
FT-301系列智能粉末電阻率測試系統 （升級版）
FT-301 Series intelligent powder resistivity test system (upgrade)
概述：采用一體化結構設計，將粉末比電阻的測量與粉體電阻率/電導率分析為一體式，測量與數據分析全部通過PC軟件完成，粉體壓強與電阻值、電阻率、電導率值的變化關系；粉體受到壓縮直至平穩時，描述了粉體在壓縮體積變化過程中，電性能的變化趨勢，采用全自動操作模式運行，自動數據分析與管理。四端法測量模式。
Overview: the integration structure design, the powder ratio resistance measurements and powder resistivity/conductivity analysis for one-piece, measurement and data analysis was done by the PC software, The change relationship between the powder pressure and resistance, the resistivity and the conductivity; Powder is *pressed until smooth, describes the changing trend of the electrical properties in the process of *pression volume. Using automatic operation mode, automatic data analysis and management. Four terminal method of measurement.
適用范圍：需要對電性能進行分析的導電性粉末，如：碳素粉末廠、焦化廠、石化廠、粉末冶金廠等生產加工企業部門；高等院校、科研部門，質量檢驗機構，質量管理部門，研發部門等。
Scope of application: to analyze the electrical conductive powder, such as: carbon powder plant, coking plant, petrochemical plant, powder metallurgy factory etc production and processing enterprises sector; university, scientific research department, quality inspection *anization, quality management department, r&d department, etc.
|
規格型號/ model |
FT-301A |
FT-301B |
FT-301C |
FT-301D |
|
|
1.電阻/ resistance |
1×10-8—2×105Ω |
10-7～2×107Ω |
10-6～2×106Ω |
10-5～2×106Ω |
|
|
2.電阻率范圍/ Resistivity |
1×10-8—2×105Ω-cm |
10-7～2×107Ω-cm |
10-6～2×106Ω-cm |
10-5～2×106Ω-cm |
|
|
3.電導率/ Conductivity |
5 ×10-5～1×108ms/cm |
5×10-7～107ms/cm |
5×10-6～106ms/cm |
5×10-6～105ms/cm |
|
|
4.測試電流范圍/ current |
0-10A，*小100uA |
1μA，10μA，100μA，1mA，10mA，1000mA |
|||
|
5.測量電壓量程/ Voltage |
0-2v；分辨率： 0.1μv 精度0.1%
|
電壓量程/ voltage：2mV 分辨率/ 20mV 200mV 2V Resolution：0.1uV 測量精度±（0.1%）/、 A*uracy ± (0.1%) |
|||
|
6.電流精度/ Current A*uracy |
±0.1% |
±0.1% |
±0.2%
|
||
|
7.電阻精度/ Resistance A*uracy |
≤0.3%標準電阻/ standard resistance 分辨率0.01μΩ |
≤0.3%標準電阻/ standard resistance 分辨率0. 1μΩ |
|||
|
8.PC軟件界面/display |
電阻值、電阻率、電導率值、溫度、壓強值、單位自動換算、橫截面、高度等 resistance, resistivity, conductivity, temperature, pressure value, the unit automatically conversion, cross-section, height |
||||
|
9.測試方式/Test mode |
四端測量法/Four-terminal measurement method |
||||
|
10.傳感器壓力/Pressure Sensors |
200kg；(其他規格可以定制) / (Other specifications can be customized) |
||||
|
11.粉末模具/Powder Mold |
模具：內徑10mm；高：25mm ；內徑20mm；高：25mm（選購） Mold: inner diameter 10mm, height: 25mm, inner diameter 20mm, height: 25mm (choose to buy) |
||||
|
12.工作電源/power supply |
輸入: AC 220V±10% ,50Hz 功 耗：<60W Input: AC220V ± 10%, 50Hz Power consumption: <60W |
||||
|
13. 主機外形尺寸/dimensions |
約H700mm*L650mm*D300mm about H700mm*L650mm*D300mm |
||||
|
14.凈重量/* Weight |
約45kg about 45kg |
||||
|
15. 標配外選購/Others buy |
1.標準校準電阻1-5個；2.電腦和打印機依據客戶要求配置；4.計量證書1份 1. Standard calibration resistor 1-5. 2. *puters and printers based on customer configuration requirements. 3. Measurement certificate 1.
|
||||
點擊圖片查看原圖
